Sponsored Links

Kamis, 22 Maret 2018

Sponsored Links

5/16x3.25 Individual Blank Firesteel Ferrocerium Rod - Survival ...
src: s-media-cache-ak0.pinimg.com

Ferrocerium is a synthetic pyrophoric alloy that produces hot sparks that can reach temperatures of 3,000 °C (5,430 °F) when rapidly oxidized by the process of striking. This property allows it to have many commercial applications, such as the ignition source for lighters (where it is often known by the misleading name "flint"), strikers for gas welding and cutting torches, deoxidization in metallurgy, and ferrocerium rods (also called ferro rods, flint-spark-lighters and wrongly "flint-and-steel" as this is the name of a different type of lighter using a section of high carbon Steel and a natural flint). Due to ferrocerium's ability to ignite in adverse conditions, rods of ferrocerium are commonly used as an emergency combustion device in survival kits.

Ferrocerium was invented in 1903 by the Austrian chemist Carl Auer von Welsbach. It takes its name from its two primary components: iron (from Latin: ferrum), and the rare-earth element cerium. The pyrophoric effect is dependent on the brittleness of the alloy and its low autoignition temperature.


Video Ferrocerium



Use

While ferrocerium-and-steels function in a similar way to natural flint-and-steel in fire starting, ferrocerium takes on the role that steel played in traditional methods: when small shavings of it are removed quickly enough the heat generated by friction is enough to ignite those shavings, converting the metal to the oxide, i.e., the sparks are tiny pieces of burning metal. The sparking is due to cerium's low ignition temperature of between 150 and 180 °C (302 and 356 °F). About 700 tons were produced in 2000.

Comparison with natural flint

Ferrocerium bears no chemical relationship to the rock flint. The similarity lies in the fact that both materials have historically been used to generate sparks. In traditional flint-and-steel fire-starting systems (using natural flint), an iron-bearing rock was used, which has a resemblance to ferrocerium, as it is iron in the tiny shards of rock produced in the striking process that burn.

Flint spark lighter

A flint spark lighter (sometimes just called a spark lighter, striker, or flint lighter) is a type of lighter used in many applications to safely light a gaseous fuel to start a flame. It is most commonly used for Bunsen burners and oxyacetylene welding torches.

A flint spark lighter works by rapidly rubbing a small piece of ferrocerium upon the sharp edge of any substance that is harder than the rod, However, carbon steel works better than most other materials in much the same way flint and steel are used. This manual rubbing action, done by squeezing the handle, creates a spark, which then lights the gaseous fuel.

As tinder-igniting campfire starter rods it is sold under such trade names as Blastmatch, Fire Steel and Metal-Match for survivalists and bushcraft hobbyists. Some manufacturers and resellers incorrectly call them "magnesium" rods. However, some manufacturers combine a strip of ferrocerium along with a strip of magnesium in the same item, to be used by scraping off flakes of magnesium and then striking the ferrocerium with a knife. The sparks from the ferrocerium will ignite the magnesium, which will in turn ignite the tinder.


Maps Ferrocerium



Composition

It is also known in Europe as Auermetall after its inventor Baron Carl Auer von Welsbach. Three different Auermetalls were developed: the first was iron and cerium, the second also included lanthanum to produce brighter sparks, and the third added other heavy metals. In the Baron von Welsbach's first alloy, 30% iron (ferrum) was added to purified cerium, hence the name "ferro-cerium".

A modern ferrocerium firesteel product is composed of an alloy of rare-earth metals called mischmetal (containing approximately 20.8% iron, 41.8% cerium, about 4.4% each of praseodymium, neodymium, and magnesium, plus 24.2% lanthanum. A variety of other components are added to modify the spark and processing characteristics. Most contemporary flints are hardened with iron oxide and magnesium oxide.


Gallery for the Armageddon Ferrocerium Firesteel, Magnesium Rod ...
src: www.businessrecall.co.uk


See also

  • Firelighting

Wood spirit carving ferrocerium rod handle from Sunsetbay Bonnie ...
src: i.ytimg.com


References


DIY - Deer Antler Ferrocerium (Ferro) Rod Handle - YouTube
src: i.ytimg.com


External links

  • Jorgenson, John D.; Corathers, Lisa A.; Gambogi, Joseph; Kuck, Peter H.; Magyar, Michael J.; Papp, John F.; Shedd, Kim B. "Minerals Yearbook 2006: Ferroalloys" (PDF). United States Geological Survey. Retrieved 2009-04-24. 

Source of the article : Wikipedia

Comments
0 Comments